John Deere - Compact Utility Tractors 2017 John Deere 1025R


1025 R

1025 R

John Deere - Compact Utility Tractors
2017 John Deere 1025R



Meet the most capable sub-compact tractors on the market: the John Deere 1 Family. With up to 25 available horsepower, AutoConnect™ decks, iMatch™ compatibility, not to mention hundreds of implement and attachment options...even the hardest chore on your list doesn't stand a chance.

Powerful Tier 4-compliant diesel engine
New, easy-lift hood with dual gas-charged lift struts
Premium Operator Station with ergonomic seat, armrests and fender lights
Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes
Family: EYDXL1.27NS1 FYDXL1.27NS1 GYDXL1.27NS1
Manufacturer: Yanmar
Engine model: 3TNV80F-NCJT
Engine power (gross): 17.8 kW/23.9 hp/24.2 PS SAE J1995 rated power
Power take-off (PTO) power: 13.4 kW/18 hp
Rated engine speed: 3200 rpm
Type: Diesel
Injection pump type: Indirect Injection
Aspiration: Natural
Emissions compliance: Final Tier 4
Cylinders/displacement: 3 / 1.267 L3 / 77.3 cu in.
Number of cylinders: Three
Cylinder liners: Cast-in-block
Bore and stroke: 80x84 mm/3.15x3.31 in.
Compression ratio: 23.0:1
Lubrication: Pressurized
Cooling system: Water pump
Air cleaner: Dual element with mechanical restriction indicator
Engine torque at rated speed: 55.2 Nm/40.7 lb-ft
Fuel tank capacity: 21.2 L/5.6 U.S. gal.
Battery size: 500 CCA
Alternator (12-V): 40 amp
Starter size: 1.2 kW/1.6 hp
Fuel System
Type: Indirect Injection
Fuel consumption: 5.8 L/hr/1.5 U.S. gal./hr
Standard transmission; forward/reverse: Hydrostatic - 2 range
Left-hand reverser: No
Final drive: Bull Gear
Brakes: Wet disc (left-hand pedal)
Steering: Power
Front: 612 kg/1349 lb
Rear: 715 kg/1576 lb
Creeper: No
Cruise control: Standard
Differential lock: Yes
Type: Open center
Pump rated output: 24 L/min/6.3 gpm
Steering: 10.8 L/min/2.8 gpm
Implement: 13.2 L/min/3.5 gpm
Pump type: Gear
Maximum operating pressure: 137.9 bar/2000 psi
Draft control sensing: Position control
Remote control valves available: Two
3-Point Hitch
Category: Limited Category 1
Lift capacity, 24-in. behind link arms: 309 kg/681 lb
Power Take-Off (PTO)
Standard: Rear - 540 rpm/Mid - 2100 rpm
Control: Independent
Clutch: Wet disc
Brake (for mid and rear PTO): Wet disc
Fluid Capacities
Crankcase with filter: 2.7 L/2.9 qt
Transmission and hydraulic system: 3.7 gal./14 L
Final Drive
Type: Bull Gear
Operator Station
Rollover protective structure: Yes
Type: Foldable
Platform - flat/straddle: One-piece semi flat
Gear shift location - console/floor: Left Hand Side
Wheelbase: 145 cm/57.1 in.
Front axle clearance: 195 mm/7.7 in.
Turning radius without brakes: 2.25 m/7.4 ft
Limited slip differential: No
Approximate shipping weight (open-station; cab): 655 kg/1444 lb
Front: R4 - 18x8.5-10
Rear: R4 - 26x12-12
Front tread range: 91.8 cm/36.1 in.
Toolbox: Yes

Engine Information

Engine Manufacturer Yanmar
Engine Type 3TNV80F-NCJT
Horsepower 23.9 hp (17.8 kW)
PTO HP 18 hp (13.4 kW)
Rated RPM 3200 rpm
Bore and Stroke 3.15x3.31 in. (80x84 mm)
Wheelbase 57.1 in. (145 cm)
Weight 1444 lb. (655 kg)
Ground Clearance 7.7 in. (195 mm)
Tire Size Front: R4 - 18x8.5-10 ; Rear: R4 - 26x12-12
Fuel System Indirect Injection
Fuel Capacity 5.6 U.S. gal. (21.2 L)
Transmission Hydrostatic - 2 range
Brakes Wet disc (left-hand pedal)
Hydraulics Type: Open Center ; Pump rated output: 6.3 gpm (24 Lpm)

Related Products